COAD-14

Automotive Repair Shop

Product Features

Automatic door for repair shop
and maintenance service center, perfectly preventing
noise and cold wave through strong sealing power

With its fast open and close speed, the door helps to keep a proper indoor temperature
through energy saving in winter.
The strong sealing power of the door helps to solve complaints about dust and noise.
The high-speed operation of the door makes easy vehicle access.

Detail Contents

Frame

Description of frame A

Mold with high-strength AL dual extruded bar; strong against wind; separation one-by-one layer in collision
Easy for a/s which is fast and lowest fee.

Description of frame B

Stylish appearance with round design; Wind Lock System without derailment or deformation

Description of frame C

Bearing design without external protruding; improvement in fault by impurities and rust-free

Sheet

The world-class premium fabric (SOL Screen Coating ) for boat

No twist and pinhole of fabric; excellent adhesion strength for easy process
Surface treatment: Fluorine (PVDF), acrylic, and PU treatment; single-side & double-side repeated 1-5 times of treatment
Customized selection (antibacterial & flame-resisting dual weaving structure)

Motor

1. Vertical axis reducer with high efficiency
About 20% efficiency higher than worm gear; more than 85% efficiency of reducer
2. Low noise & low vibration
Lower noise and vibration than worm gear/average 52~65dB
3. High strength and long lifespan
Increased gear strength and lifespan through carburizing heat treatment
4. Lightweight and optimization
Installation space saving and case and reducer weight reduction by offset

	Worm reducer	Hypoid reducer	Remark
Motor capacity(kW)	0.4	0.4
Reduction ratio	10:1 ~ 20:1 1-step Worm 1/60	10:1 ~ 20:1 1-step Hypoid 1/10 2-step helical gear 1/6
Efficiency	60%	85%	About 25% difference
Output Torque (kg-m)	7.8	11.0	About 30% difference
Size (mm) motor included	416x238x195	372x132x118	About 50% difference
Weight (kgf) motor included 20	20	11	About 50% difference in weight

Controller

Features of the controller for speed door

Inverter controller for speed door with the world’s best performance
Applicability to all automatic doors such as basic type, recovery type, Counter balance and others
Position controllability for ENCODER / LIMIT TYPE
Applicability to 1HP ~ 3HP motor
2-Step Open Control to differentiate persons from vehicles
Compatibility with various devices (air curtain, conveyor, light bar, etc.)
Maximized insect-proof and cooling & heating effect by setting an air curtain time
Waterproof CASE to prevent controller damage from rain inflow and flooding

Perfect Seal

coad

Sensor

1. Ultrasonic sensor

Herkules 2E

Features

Detect and distinguish between people or vehicles
For heights of 2 to 7 m
Temperature range –30 °C to +60 °C
Direction recognition and cross traffic masking
Individually adjustable detection area provides for an enormously wide range of applications
Mask out crossing traffic, which prevents unnecessary opening and lowers energy consumption

PrimeMotion C

Features

Based on microwave technology
Up to 4.8 metre wide field can be used, Mounting height up to 4 metres
Its cross traffic masking and direction recognition functions avoid unnecessarily long opening times and save energy.
User-friendly operation make it easy to install and mean it is ready to use quickly.

2. Vehicle & Loop Detector

Matrix (Loop Detector)

Features

3. Safety Sensor

Safety Sensor (Basic Option)

Features

Patent obtainment
Attachment of safety cap for malfunction prevention and normal operation even with impurities
Minimal non-detection area by basically providing 4-point safety sensors on the left and right frames (two in each frame)

Pressure Sensor

Features

At door down, if an obstacle increasingly presses the tube, door stops or is opened.
Automatic door opening when an object touches door
Even low pressure of 3 to 4 mbar is enough to guarantee the electric contact will switch
high level of response sensitivity, which enables it to protect people and vehicles from practically all directions.

4. Switch

Proximity switch (Microwave motion sensor)

Features

Door open & close by detecting hands or objects
Clean maintenance without any touching impurities and bacteria of the hands on switch
Good for food, pharmaceutical, and cosmetics companies which are sensitive to hygiene
Non-contact motion recognition
Detection distance: 10~40cm
Operating temperature: 20 ℃ ~50 ℃

Pull Switch